Tony,
Is it still possible to do port forwarding with this config ?
""Tony Medeiros"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Here you go. It's called "easy IP". It's just NAT over a negotiated
> interface.
> http://www.cisco.com/warp/customer/793/access_dial/easyip.html
>
> Tony M
> #6172
>
> ----- Original Message -----
> From: "Bob Lepine"
> To:
> Sent: Saturday, September 08, 2001 5:44 AM
> Subject: Cable Modem, DHCP & NAT [7:19106]
>
>
> > Hi, I have a 2600 router and the latest software so I can get a DHCP
> number
> > from my service provider. I'm trying to configure the router so that I
can
> > put my static network on the inside. It accepts the DHCP number but I
> can't
> > get it to do the translation to the inside seeing that the outside
number
> is
> > not a static number. Anyone have experience with this?
> > Any help would be appreciated.
> >
> >
> > --
> > Bob Lepine
> > MCSE,MCDBA,CNA,CCNA,MCT
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19128&t=19106
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
