> I'm trying to upgrade the IOS on a 2500 router. When I attempt to delete > the current IOS image, or erase the flash altogether, it tells me it's in > read-only mode. Fine. I've scoured Cisco's website trying to find a way > to > put the flash into read/write mode so I can do this IOS update, but to no > avail. I did fine one page talking about partitioning the flash, but > couldn't seem to use that to my advantage. My next thing is to boot to > rommon and try to wipe the flash there (then use the console to transfer > the > 10MB IOS image at a blazing 9600 baud..... goodie =) > > Any thoughts or information is appreciated. > > Mike W. -- Sent through GMX FreeMail - http://www.gmx.net
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24647&t=24564 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
