Thanks again to everyone that replied. I did the "config register to 0x2101" and it worked just fine. The nice thing about that approach was that it loaded my current config upon booting, so once it was up, my flash was in Read/Write and I could TFTP the new image. I manually did an "erase flash" before starting the TFTP, however, upon giving the "copy tftp flash" command, it prompted me to see if I wanted to erase the flash.
Thanks again! Mike W. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24671&t=24564 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
