Navin Parwal wrote: > Hi , > Iam facing a similar consle port problem as mentioned on this tips at : > http://www.cisco.com/warp/public/471/17.html > > on my Cisco 2610. > The symptom is as folows : > Output from the router on the console screen will be seen, but anything > which is typed in will not be seen > > and the solution mentioned is: > The fix is to have the customer disable hardware flowcontrol or strap CTS > high. > > I have disabled the hardware flowcontrol but that does not solvemy problem > , can anyone tell me how to strap CTS high as mentioned in the solution as > i could ot find that option on the Hyper terminal . > > Thanks in Advance > > Navin Parwal Hi Navin, Before you get too carried away, I strongly suggest abandoning HyperTerminal and installing any other good terminal emulator. Try Teraterm Pro, which is an industrial-strength, stable, freeware terminal emulator that is MUCH better than HyperTerminal.
See http://hp.vector.co.jp/authors/VA002416/teraterm.html Hardware-wise, I assume you are using the standard black or blue rollover cable from Cisco, right? Are you using the RJ-45/DB-9 adapter from Cisco or a something else? What kind of laptop or PC (or other?) are you using? In my job at a Cisco reseller I have successfully connected to thousands of Cisco console ports (old and new) over the last 3 years and have never even heard of this problem. Do other experienced Cisco people see this? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=25203&t=25201 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
