One thing need to be considered is what standby group you will configure for each vlan. Suggesting you to select different group numbers. e.g.
interface Vlan5 ip address X.X.5.252 255.255.255.0 standby 5 timers 2 6 standby 5 priority 100 preempt standby 5 ip X.X.5.253 interface Vlan6 ip address X.X.6.252 255.255.255.0 standby 6 timers 2 6 standby 6 priority 100 preempt standby 6 ip X.X.6.253 Regards, Debra Chan -----Original Message----- From: khramov [mailto:[EMAIL PROTECTED]] Sent: Wednesday, December 12, 2001 5:23 PM To: [EMAIL PROTECTED] Subject: HSRP design [7:28982] Hello I have a design question. I have two 5505 with RSM in each that are connected to each other with 200Mb trunk. Right now RSM of the first switch is in VLAN 1; RSM of the second switch is in the VLAN 2. Altogether I have about 20 VLANs. I am planning to run HSRP between both RSMs. What would be the best way of doing it? Here is what I think needs to happen: 1. Change the IP address of the second RSM and make it a part of VLAN 1 2. Reconfigure all VLAN 3. For even-numbered VLANs make the primary gateway RSM1 4. For odd-numbered VLANs make the primary gateway RSM 2 5. Copy the configuration for VLANs from RSM 1 to RSM 2 I do not have much experience in design so any input is more than welcome. Thanks, [GroupStudy.com removed an attachment of type text/x-vcard which had a name of khramov.vcf] For more information about Barclays Capital, please visit our web site at http://www.barcap.com. Internet communications are not secure and therefore the Barclays Group does not accept legal responsibility for the contents of this message. Although the Barclays Group operates anti-virus programmes, it does not accept responsibility for any damage whatsoever that is caused by viruses being passed. Any views or opinions presented are solely those of the author and do not necessarily represent those of the Barclays Group. Replies to this email may be monitored by the Barclays Group for operational or business reasons. ------------------------------------------------------------------------ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=28994&t=28982 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]