I just finished testing with the lec (XO), while they could run clean to the NIU, they had a problem running quazi to the csu. Finally I think they will be taking some responsiblility for the issue.
Thanks for everyones input, Im learing way more about Layer 1 than I care to, but then again isnt knowledge, power!??? Thanks Erich -----Original Message----- From: Steven A. Ridder [mailto:[EMAIL PROTECTED]] Sent: Wednesday, January 09, 2002 11:06 AM To: [EMAIL PROTECTED] Subject: Re: Serial Line problems [7:31426] If it was a crossed pair somewhere, it wouln't come up at all. No carrier. It can very well be bad dmarc extensions, but so many all at once. Is it all in one area of the state/city? Could still be bad telco wiring if in same area of CO. I believe that the customer of yours receive timing on the CO, not your frame-switch, even though your souce is supposed to be higher. Are you not synced with the telco switch or the USNO? Maybe someone else can speak about the avail banwidth output, but I just checked a T1 frame module, and I have the same output, so I don't think it's that. I'll look that one up though. I'd still focus on the timing. -- RFC 1149 Compliant. FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31464&t=31426 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]