I don't know why it irritates me so much...it's really crazy but I can't stand hearing people say NIC Card.... NIC...NIC....just say it!...grin...
>>> "Allen May" 01/11/02 01:36PM >>> Yep...and PIN Number, ACL List, etc. I used to bug instructors by referring to them as Network Interface Card Card's to point out what NIC Card really was ;) Allen ----- Original Message ----- From: "Patrick Ramsey" To: Sent: Friday, January 11, 2002 11:54 AM Subject: RE: full-duplex Ethernet cable? [7:31643] > Is NIC Card kinda like a FAT Table? : p > > >>> "Daniel Cotts" 01/11/02 12:34PM >>> > Unshielded Twisted Pair (UTP) uses two pair (four wires) on pins 1&2 and 3&6 > of an RJ-45 plug. Whether it runs as full or half duplex is determined by > the connected equipment - NIC card, Hub, Switch, router, etc. > If Ethernet is running over coax cable then it is limited to half duplex. > > > -----Original Message----- > > From: mlh [mailto:[EMAIL PROTECTED]] > > Sent: Friday, January 11, 2002 10:56 AM > > To: [EMAIL PROTECTED] > > Subject: full-duplex Ethernet cable? [7:31643] > > > > > > Hi, there, > > > > > > how many pairs of two-twisted cable are used for full-duplex > > Ethernet ? what > > is the > > difference between full- and half- duplex cable? > > > > Thank you in advance. > > > > > > > > Regrads, > > > > mlh Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31659&t=31643 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
