VLAN in 2848L3 works like that.... .... ! interface FastEthernet2 duplex half speed 10 bridge-group 20 -> VLAN 20 bridge-group 20 spanning-disabled ! interface FastEthernet3 duplex half speed 10 bridge-group 20 -> VLAN 20 bridge-group 20 spanning-disabled ! .... ! interface BVI20 description *** Vlan 20 *** ip address 192.168.1.1 255.255.255.0
Stefan At 16:03 17.01.2002 -0500, 416South wrote: >Have a 2948GL 3 and want to set up a vlan but it docs state that you have to >set up ISL . I don't want ISL enabled. is there a way to just create VLANS >like in other L3 switches? I don't want to make these routeable or anything >just L2 VLANS simple VLANS > >ie. when I do a "int vlan 400" this would normally create a new vlan and put >me into interface mode > >when i do a "int vlan ?" the options are to put in the vlan # but when I do >all i get is a wrong command with the famous ^ at the vlan point in the >command > >docs doc's dont seem to give enough info > >any Ideas???? > >thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=32371&t=32351 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
