At 08:05 PM 2/21/02, Chuck wrote: >to augment the other answers, the IP hop count is really the IP TTL value. >It can never exceed 255
You're confusing two issues. Remember the router has two jobs: forwarding packets and learning the topology. Hop count has to do with the latter and affects what goes in the routing table. The IP TTL causes a router to drop a packet before forwarding if the TTL becomes zero. >EIGRP defaults to 100 hops, so I would expect that the routing packet IP TTL >is set at 100 at that point. Routing packets only go to neighbors. The IP TTL should be set to one or two. This has nothing to do with hop count which will be later in the packet in the distance vectors. >Well ( checking the sniffer trace that Priscilla so thoughtfully supplied a >couple of days ago ) I'm seeing the IP TTL as 2. Still, maybe there is an >adjustment made. After all, the (E)IGRP metric includes end to end metrics. >hhmmm... ( looking over Priscilla's trace again ) way down there I see an >EIGRP hop count 0 line. The router was advertising a directly-connected network. >the IP TTL is still really the only thing that makes sense in terms of the >way IP works. In terms of forwarding maybe. You better reconsider routing protocols though... Priscilla >Anyone? > >Chuck > >""Steven A. Ridder"" wrote in message >[EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Anyone know why there is a hop-count in EIGRP? It has a 1 byte value, but > > it doesn't limit the number of hops and it looks like routers don't use it > > in their calculations. Why is it there? > > > > -- > > RFC 1149 Compliant. ________________________ Priscilla Oppenheimer http://www.priscilla.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36151&t=36082 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]