That wouldn`t work ! Telnet from outside network is prohibited even if you define it with "telnet blah outside" command. The work around is to protect the telnet traffic with IPSec or configure SSH if you don`t want hassle with IPSec configuration.
HTH > u dont need to add a conduit for telnet unless u have blocked > port 23. > > just add > telnet ip_address [netmask] [if_name] > > to allow telnet from ip_address > > bye swapnil > > ""Hunt Lee"" wrote in message > news:[EMAIL PROTECTED].; > > Hi all, > > > > I have two questions about PIX 501, it would be great if someone can shed > > some light on this: > > > > 1) Currently, I'm using a software called RANCID to monitor and save > > configs for my works' routers.I know that RANCID uses a Clogin to get into > > the router, it then do a show running-config command to veiw the configs, > > and then backs it up. > > My question is, would PIX 501 supports Clogin? > > > > 2) Also, I know one can use "conduit permit icmp any any" to allow the > > PING packets to get thru the PIX. Would I be able to use a similar > command > > which will allow me to telnet from "outside network" into the PIX? > > > > Please help... > > > > Best Regards, > > Hunt Lee Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37133&t=37129 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
