Hunt/Swapnil - You can not telnet to the outside interface. You will need to configure SSH.
""Swapnil Jain"" wrote in message news:[EMAIL PROTECTED].; > u dont need to add a conduit for telnet unless u have blocked port 23. > > just add > telnet ip_address [netmask] [if_name] > > to allow telnet from ip_address > > bye swapnil > > ""Hunt Lee"" wrote in message > news:[EMAIL PROTECTED].; > > Hi all, > > > > I have two questions about PIX 501, it would be great if someone can shed > > some light on this: > > > > 1) Currently, I'm using a software called RANCID to monitor and save > > configs for my works' routers.I know that RANCID uses a Clogin to get into > > the router, it then do a show running-config command to veiw the configs, > > and then backs it up. > > My question is, would PIX 501 supports Clogin? > > > > 2) Also, I know one can use "conduit permit icmp any any" to allow the > > PING packets to get thru the PIX. Would I be able to use a similar > command > > which will allow me to telnet from "outside network" into the PIX? > > > > Please help... > > > > Best Regards, > > Hunt Lee Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37175&t=37129 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]