Design sounds reasonable to me from what the info I have below. Fan out from 10 to 100 looks good. I might question the ability of the aggregation switch buffering the data from 5 switches while passing data to the router....
anyone else ? Larry Letterman Cisco Systems [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of J-B Sent: Monday, April 01, 2002 7:10 AM To: [EMAIL PROTECTED] Subject: Switchs Environment Question [7:40034] Switch Setups Opinion Team, The following is how we setup our switches in our network in one building: All ports are configure to full, 10mb and enable port fast The up link is configure as full, 100, not enable port fast The rest of the switch configuration is using the default settings (SWITCH MODEL 2950) Network layout (FRAME-RELAY SPOKE)5 floors, a switch in each floor all connected to a switch in the first floor, which connects to a 1600 router, which has a connection To a frame-relay network. (FRAME-RELAY HUB) All PC's are configure to a 10mb-full My question, is this an efficient way of this configuration... Thanks, J Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40039&t=40034 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]