Steve, Why is redistribution into an IGP a big no - no? My understanding is that this is what people usually do.
If you use OSPF and E2 routes on the third router, then OSPF should find the optimal route. Alex Steven A. Ridder wrote: > > If I had 2 7206 routers dual homed to two different ISP's for > redundancy, I > know I don't NEED the full bgp table, but if I were to accept > them for > optimal routing within my network, how would I tell my internal > routers who > don;t run BGP which of the two 7206 routers to go to for a > specific route > oout to the internet? I assume doing a redistribution into the > IGP is a big > no-no, so how do small 3600's and 2600's inside the AS know > which of the two > routers to send the traffic to based on the fact that that one > router has > the better route? > > I can think of adding a third 7206 router which would run BGP, > connect to > the other two routers and accept the full table as well, and > the internal > routers would use that one as the gateway to the internet, but > if I didn't > have that third router, is there any other way? > > -- > > RFC 1149 Compliant. > Get in my head: > http://sar.dynu.com > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40532&t=40525 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
