How do you plan on making R1 talk to R2 ? Typically you need both routers on the same network, unless you are going to use ip un-numbered ona serial link...
Larry Letterman Cisco Systems [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Kent Browning Sent: Sunday, April 07, 2002 2:17 PM To: [EMAIL PROTECTED] Subject: Routing Question [7:40766] Scenario 1 ========== ---int0-(R1)-int1 --------int0-(R2)-int1 --- Router 1 Int 0: 192.168.1.1 Int 1: 192.168.2.1 Router 2 Int 0: 192.168.2.2 Int 1: 192.168.3.1 Scenario 2 ========== ---int0-(R1)-int1 --------int0-(R2)-int1 --- Router 1 Int 0: 192.168.1.1 Int 1: 192.168.2.1 Router 2 Int 0: 192.168.3.1 Int 1: 192.168.4.1 Question: ========= In Scenario 1, there are 3 segments: Segment1: 192.168.1.0 Segment2: 192.168.2.0 Segment3: 192.168.3.0 I know this is correct. In Scenario 2, how many segments are there? Is there anything wrong with routing router 1 to router 2 and not using a common segment? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40769&t=40766 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
