Ping, Have you configure the following comands on FR switch ? 1. Global config mode : "frame-relay switching" 2. Interface config mode: "frame-relay intf-type dce"
----- Original Message ----- From: "PING" To: Sent: Friday, April 12, 2002 10:49 AM Subject: Frame-Relay Problem [7:41250] > If I have this simple net: > > 3660(FR Switch)-------------------3640 > > I am using NM-4T on both routers. > Default (HDLC) encapsulation causes both router serial interfaces to > come up. I am trying inverse ARP from Caslow book but as > soon as I enable FR (or even PPP) encap, line goes down. 3660 is the DCE > > and supplying clock. > I am not sure if someone has tried NM-4T with FR? > > /N Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41258&t=41250 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]