The question is that Caslow says on page-110 that if FR switching is on, just enabling the encapsulation will bring up the PVC by using inverse arp. I don't see that happening.
/N "Engelhard M. Labiro" wrote: > Ping, > > Have you configure the following comands on FR switch ? > 1. Global config mode : "frame-relay switching" > 2. Interface config mode: "frame-relay intf-type dce" > > ----- Original Message ----- > From: "PING" > To: > Sent: Friday, April 12, 2002 10:49 AM > Subject: Frame-Relay Problem [7:41250] > > > If I have this simple net: > > > > 3660(FR Switch)-------------------3640 > > > > I am using NM-4T on both routers. > > Default (HDLC) encapsulation causes both router serial interfaces to > > come up. I am trying inverse ARP from Caslow book but as > > soon as I enable FR (or even PPP) encap, line goes down. 3660 is the DCE > > > > and supplying clock. > > I am not sure if someone has tried NM-4T with FR? > > > > /N Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41260&t=41250 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]