hey all, im new to the newsgroup, nad pretty new to real workd cisco. my experience comes mainly from reading cisco press and sybex books along with a few virtual labs. now im consulting for a small bank that just implemented a swicthed network from thier old stacked hubs. everything is going OK but i still feel that the network may be a bit laggy. not sure if its the switches or what, so my real question is.... what are the first things you do when confuring a new switch? I know I run the setup and configure IP, Netmask , Default GW etc....we dont have any redundant links, so should i disable STP? how about port fast? its only one vlan, and we only have one swicth per subnet, except for the main branch which has one switch per dept, but they all connect to the same server and there are no routers for internal traffic, only to connect to the branches via fractional t1's. so i dont think vlans are an option here...anyway...you guys/gals know of any special things i should be looking for?
tia luis Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=42276&t=42276 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
