Here are the configs from two sites. Basically I have 370xx and 379xx extensions assigned to Site A and 79xx assigned to Site B. All calls from Site A are going thru without any problem. Site B, however cannot make a call out to Site A. I thought maybe the 5-digit extensions at Site A and 4-digit extensions at Site B may be causing the problem, but it's unlikely since Site A is working fine.
Any idea? I am in the jam to get this up and running so any help is appreciated. ""Steven A. Ridder"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > show me the configs > > > > ""Firesox"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > I have configured 2600 routers at two different sites connected to PBX. > > Both have internet connection. > > At site A, I can make calls to site B without any problems with almost > toll > > quality. My problem is that I cannot make call from site B to site A. > > Both routers are configured identical(except for the dial pattern of > > course). PBXs are configured with correct dial plan and udp. > > I have no idea why I cannot make a call from site B to site A. > > I would appreciate if someone can give me tips on this. [demime removed a uuencoded section named config.txt which was 37 lines] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=48751&t=48709 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
