I am still lost how can a router with a 10Mb interface act as a Router on a stick? I may be missing something. Could you show us a diagram this is very interesting? How does the router know that there are two different subnets connected if you don't tell it? I think it has something to do with the router looking at the 192 subnets as one network. I bet that wouldn't act as a ROAS if you changed one of the networks to say a 10 subnet. Basically what you are saying in that if you want to route all you have to do is connect different networks to a hub, connect the hub to a single router port and then it will just start routing. I would love to see the output of that one. Are you sure that the router is doing the routing or is another device on the physical segment providing that service. I know that a host configured with the address of 10.10.0.1/16 will be able to ping a host configured as 10.10.0.100/24. I believe that something similar is going on here. Some debugs and configs would be great cause you learn something new everyday.
----- Original Message ----- From: "Frank H" To: Sent: Wednesday, July 24, 2002 4:43 PM Subject: Re: Proper network design? [7:49536] > Yes, I am using a 2514. It does have 2 10BaseT interfaces (through AUI > adapters). I am not using subinterfaces. Both ports are used - one port goes > to the Internet (for hosts that require Internet access) and the other > connects directly to the 24 port hub which resides within the internal LAN. > This internal LAN (network 192.168.0.0/24) can also communicate with network > 192.168.2.0/24 (also connected on the hub) because the 2514 routes > 192.168.2.0/24 traffic back to a cellular network host controller > (192.168.0.100/24). The 2514 is acting as a regular router for Internet > traffic and a "router on a stick" for 192.168.2.0/24 traffic. It was strange > for me at first, but now I get the picture. > > Frank Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=49585&t=49536 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
