Hopefully none!!! ATM is mostly dead in the LAN with the advent of 100/1000M ethernet and 10G starting to trickle out.
I know someone will point out and exception but it will be the exception not the rule. Just say no!! to LANE Dave Ken Chipps wrote: > > I have been reading up on how to configure ATM on Cisco equipment. In > particular I have been looking at examples of how ATM is used in a campus > network, such as to connect two buildings. The Cisco documents for the 8510 > MSR for example discuss configuration using LANE clients, MPOA, Classical > IP, and bridging. The part I have been unable to figure out is, in the real > world, which of these methods would I use to create a campus area network > connecting together two or more buildings using ATM? For example, Cisco says > that Classical IP over ATM is only used for inband management of the ATM > switch router. Yet it seems to me to be the way to do this. If not, is LANE > the answer? Any help would be appreciated. > > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "You don't make the poor richer by making the rich poorer." --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=53742&t=53737 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
