evans Anthony wrote: > > Hi all, > > Just a quick question: > > I have the following setup: (a)----(b)---OSPF network > > Router A (extreme L3 switch) is connected to router B, and > router B is running ospf to other cisco boxes. I have setup a > static route that points from A to B so machines can get to > pc's in the ospf area. The static that ive configured is a /13 > next-hop. > > Router a is not running ospf, and b only has ospf configured on > the interfaces connected to the ospf network. Do I need to > configure anything on router b to allow packets from router A's > network into router B ??
Router B knows how to route packets into its OSPF domain, so that won't be a problem, but have you considered the replies from the OSPF side going back to Router A? You'll need a static route on Router B pointing back the other way, and then it should all work fine. _______________________________ Priscilla Oppenheimer www.troubleshootingnetworks.com www.priscilla.com > Since ive got a static route pointing > to b, i guess that B will do a lookup on the destination and > route as persay. Is this correct or am I talking waffle. > > regards, > > A. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=54089&t=54040 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
