Eric,

Thank you for your response.  It was a typo on my part entering the
information in the posting. The map-list in the router does have the
correct IP address. 
I have defined (many times) the additional PVC's on the "NEW SITE"
router/map list without any success.  I apologize, I should have stated
that in my previous posting.

I inserted the neighbor statements in the OSPF process, but no success.
THE SHOw IP OSPF Neighbor statement shows ATTMPT/DROTHER for site "c"
but eventually shows as being down.  Also,  I receive a message on the
"new site" router " sent youngest key0"..

Thank You for your assistance..


-----Original Message-----
From: Erick B. [mailto:[EMAIL PROTECTED]] 
Sent: Wednesday, October 09, 2002 7:58 PM
To: Bill Smith; [EMAIL PROTECTED]
Subject: Re: ATM Problem [7:55238]

Hi,

The New site has 2 ATM PVCs defined, with a ip entry
mapped to site A and C. Site C has a typo under it's
map-list for the new site, going to 192.58.135.68
instead of 192.68.135.68. New site has no PVCs for
site B yet configured.

Also, this is multipoint non-broadcast interface so
under OSPF you will neighbor statements. 

HTH, Erick

--- Bill Smith  wrote:
> Greetings,
> 
> I have a problem/question regarding a current ATM
> Circuit.  Currently,
> our ATM cloud connects 4 of our sites.   We
> submitted an order to add
> another site into the cloud. The telco provided the
> vpi's but only two
> sites communicate.
> 
> 
>                           Site C
>                             |
>                             |
>                             |
>  Site A-----------   ATM CLOUD   ------------Site B
>                             |
>                             |
>                             |
>                           NEW Site
> 
> Sites a, b, & c communicate correctly.  The "NEW
> Site" was added but
> (pvc's to all sites), but will only communicate with
> Site A. Teloc has
> checked the VPI's and insists they are correct. 
> Which brings up another
> strange item--All the VPI's were the same:
> 
> New site
> Originating           Destination
> 90                            90
> 100                           100
> 80                            80
> 
> I have never noticed VPI's being the same on both
> ends,,Does this sound
> correct?
> 
> OSPF is the routing protocol. But only "new site"
> and site a exchange
> info.
> 
> Site A
> interface ATM5/0/0
>   ip address 192.68.135.66 255.255.255.240
>  ip pim sparse-mode
>  ip ospf authentication-key 7 05180702014D43
>  ip ospf network non-broadcast
>  map-group TEST
>  atm pvc 1 35 40 aal5snap
>  atm pvc 2 36 50 aal5snap
>  atm pvc 5 95 95 aal5snap
>  atm pvc 6 80 80 aal5snap
>  no atm ilmi-keepalive
> 
> map-list TEST
>  ip 192.68.135.65 atm-vc 1
>  ip 192.68.135.67 atm-vc 2 broadcast
>  ip 192.68.135.68 atm-vc 5 broadcast
>  ip 192.68.135.68 atm-vc 6 broadcast
> 
> 
> 
> NEW Site
> interface ATM3/0
>  ip address 192.68.135.68 255.255.255.240
>  ip ospf authentication-key 7 05180702014D43
>  ip ospf network non-broadcast
>  map-group TEST
>  atm pvc 1 95 95 aal5snap
>  atm pvc 2 100 100 aal5snap
>  no atm ilmi-keepalive
> 
> 
> map-list TEST
>  ip 192.68.135.66 atm-vc 1 broadcast
> ip 192.68.135.65 atm-vc 2 broadcast
> 
> 
> 
> 
> Site C
> interface ATM1/0/0
>  ip address 192.68.135.65 255.255.255.240
>  ip ospf authentication-key 7 010007097B0A0B4F
>  ip ospf network non-broadcast
>  map-group TEST
>  atm pvc 1 40 40 aal5snap
>  atm pvc 2 100 100 aal5snap
>  atm pvc 3 37 60 aal5snap
>  no atm ilmi-keepalive
> 
> 
> map-list TEST
>  ip 192.68.135.66 atm-vc 1
>  ip 192.68.135.67 atm-vc 3
>  ip 192.68.135.68 atm-vc 2 broadcast
> 
> Any help is greatly appreciated!
[EMAIL PROTECTED]


=====
"Those who are willing to trade freedom for security deserve neither
freedom nor security." -- Benjamin Franklin

__________________________________________________
Do you Yahoo!?
Faith Hill - Exclusive Performances, Videos & More
http://faith.yahoo.com




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=55241&t=55238
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to