Mohannad Khuffash wrote: > Hi ... > > I have tried to configure HSRP on two 3660 routers, I configured them > straight forward where only a little commands needed.But HSRP don't worked > well ! The reason simply was that they are not seeing the HSRP hello > messages so every one act as the active one ! When I checked the problem > more, I discovered that both of them are not seeing the 224.0.0.2 messages > by using the SHOW IP INTERFACE command where none of the interfaces of the > two routers are joined for this multicast group ! > My question now is how I can make them joined to 224.0.0.2 which should be > the default configuration ? Or may be I'm wrong in my investigation ?! >
hi, try "show standby", maybe this will help you. hth -bis Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59725&t=59609 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
