You can either use default-information originate, or put a default static route and redistribute that into OSPF. This will cause all traffic that is not part of your internal network to be routed out via the ASBR, hence all Internet traffic will route out through the ASBR.
Hope that helps, Albert -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of hanan Sent: Thursday, February 06, 2003 8:56 PM To: [EMAIL PROTECTED] Subject: ASBR ROUTER [7:62570] HELLO Could you please help me? I want to configure Cisco router series 2600 to enable OSPF and configure it as autonomous system border routers (ASBR) in one single area; the router has 2 interfaces one connected to ISP and the second one to my internal network that use OSPF protocol Can you tell me the commands that I must use exactly? Best regards Hanan.mawla Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62572&t=62570 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]