Hello Thank for your reply Do I need to create route redistribution in my ASBR router? As I said I want to enable ospf and make the router as ASBR, the router has 2 interface one connected to my internal network in single area and the other interface is connected to ISP so do I need to create route redistribution or its not necessary?
Best regards hanan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Friday, February 07, 2003 12:57 AM To: [EMAIL PROTECTED] Subject: Re: ASBR ROUTER [7:62570] The Long and Winding Road wrote: > > ""hanan"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > HELLO > > > > Could you please help me? > > I want to configure Cisco router series 2600 to enable OSPF > and configure > it > > as autonomous system border routers (ASBR) in one single > area; the router > > has 2 interfaces one connected to ISP and the second one to > my internal > > network that use OSPF protocol > > Can you tell me the commands that I must use exactly? > > enable > conf t > router ospf ( whatever the process ) > default-information originate always add "network ip-address wildcard-mask area area-id" command?? > control-z > write mem > > speaking of mem, I'm doing this from mem, without a book or a > router handy. > how'd I do? :-> > > > > > > Best regards > > Hanan.mawla Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62656&t=62570 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
