What terminal program are you using? I use just plain Hyperterminal. = Make sure you have it set to VT100. Here is a screen shot.
=20 =20 =20 Good Luck, =20 =20 Scott Terminiello President Scott Enterprises 5 Whitney Drive Marlboro, NJ 07746-1241 Office: (732)972-2698 Email: [EMAIL PROTECTED] =20 -----Original Message----- From: Azhar Teza [mailto:[EMAIL PROTECTED]]=20 Sent: Thursday, February 06, 2003 2:17 AM To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: RE: Modem Config [7:62479] =20 Thanks Scott ! I got modem to work, and can get to router prompt, but = it's doing the funny thing. It types twice eventhough I type it once. For example, if i type telnet command, it will type "ttlleenneett"", it's = really frustrating, it's a new 33.6 modem, but don't know why it is doing that. Regards, Teza --- On Tue 02/04, Scott Terminiello = wrote: From: Scott Terminiello [mailto: [EMAIL PROTECTED]] To: [EMAIL PROTECTED], [EMAIL PROTECTED] Date: Tue, 4 Feb 2003 22:08:30 -0500 Subject: RE: Modem Config [7:62479] Make sure the dip switch settings are as follows:1 UP Data terminal = ready normal2 UP Verbal result codes3 Down Display result codes4 UP Echo = offline commands5 UP Auto Answer first ring6 UP Carrier detect normal7 UP Load = NVRAM defaults8 Down Smart ModeYou need to reverse telnet into the modem to configure. When you reversetelnet enter the command string. Here is a = good link.http://www.cisco.com/warp/customer/471/mod-aux-exec.htmlGood = luck,Scott TerminielloPresidentScott Enterprises5 Whitney DriveMarlboro, NJ 07746-1241Office: (732)972-2698Email: [EMAIL PROTECTED] Message-----From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf OfAzhar TezaSent: Tuesday, February 04, 2003 9:08 PMTo: = [EMAIL PROTECTED]: Modem Config [7:62479]I am trying to setup a modem dialup for Cisco AUX = or Console port. Themodem connects fine, but then hangsand never goes to to = the router prompt. Is there any special configs for setting up 33.6 = usroobotics modem. Here iswhat I am doing: GLOBAL MODE:modemcap entryusrobotics:MSC=3D&F1&D3S0=3D1 LINE MODE:line aux 0 modem = InOut modemautoconfigure type usrobotics transport input all speed 38400 flowcontrolhardware line con 0 modem InOut modem autoconfigure type usroboticstransport input all speed 38400 flowcontrol hardware PIN 1, 3 = AND 8 DOWN ANDTHE REST OF THEM UP. Any idea? Thanks, Teza_______________________________________________Join Excite! - http://www.excite.comThe most personalized portal on the Web!Message = Posted at:http://www.groupstudy.com/form/read.php?f=3D7&i=3D62479&t=3D62479-----= --------- ------------------------------------FAQ, list archives, and subscription info:http://www.groupstudy.com/list/cisco.htmlReport misconduct and Nondisclosure violations to [EMAIL PROTECTED] _____ =20 Join Excite! - http://www.excite.com The most personalized portal on the Web!=20 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62573&t=62479 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
