Hi All, I have very simple question, Can we use duplicate ips on serial interfaces among them seleves although we cannot use duplicate ip on serial with Ethernet(lan interface) or loopback interface.
My topology is like this Client router server router(connected back to back) 2 interfaces 2 inetrfaces these routers connected back to back configuration int serial 0/0 encap hdlc ip address 1.1.1.1 255.255.255.0 int serial 0/1 ip address 1.1.1.1 255.255.255.0 encap hdlc now if all the two interfaces of serial even if given duplicate ip among themselves works fine. no error from cli .interfaces are up and i am able to ping remote side. The ques is that 1) Lan interface also was in different subnet but serial interface doesnot accept that ips as duplicate or of loopback 2)What Implication such have on my design ,any limitation it has Does this type of design can be used, This is small thing is confusing me about ip. Thanx in advance Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=62728&t=62728 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]