There are no static routes to these ports. I guess I am in Hybrid mode. I need to enter session 15 command to connect to router module. Then its IOS interface. The dropped packets don't appear when doing sh int on router. I'm starting to wonder if it could be a bad card.
""The Long and Winding Road"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > ""Priscilla Oppenheimer"" wrote in message > news:[EMAIL PROTECTED]... > > If nothing's plugged in, it has to drop the packets!?! :-) Are you sure > this > > isn't normal? Being a switch, it shouldn't be sending any unicasts out the > > port, because it couldn't have learned a MAC address that is out that > port, > > but it could still send broadcasts and multicasts. > > > > Sorry, if that's a clueless answer, but it is a "common sense" answer from > > someone who doesn't work with 6505 switches...... :-) > > > not at all clueless. I did not see a spot among all the "show" outputs where > packets dropped is indicated. > > I'm thinking "show interface" > > I'm also thinking that maybe there are static routes pointing out those > ports, and someone somewhere is generating traffic destined for those ports. > Maybe the author of the original post could supply some more specific > information - such as extensive outputs from the "show run" ?? > > for those unfamiliar with the higer end boxes, hyrid mode refers to running > Cat OS and and IOS on the same box. The lower end boxes - 2950, 3550, and > 4xxx with sup 3 or better, run IOS native mode. > > cat 4xxx with the sup 2 run Cat OS mode. > > 65xx without the MSFC card run Cat OS mode. Add the MSCF card, and you have > hybrid mode. unless somethng has changed recently, you cannot run a 65xx in > native IOS mode only - it has to be an L2 box alone, or a hybrid box, > running IOS and Cat OS. > > > > > > > > > > > Priscilla > > > > Sam Sneed wrote: > > > > > > I'm not sure what you mean by hybrid mode. I have the sh ver, > > > sh mod, sh ver > > > for MSFC and below. I have nothing plugged into at leat 3 > > > ports which still > > > report dropped packets. 800,000 daily. Whats strange is that > > > the 800,000 is > > > almost the same on all 3 ports. I have disabled them since then > > > but would > > > like to know why I was getting those numbers. The MSFC does the > > > layer 3 > > > routing, but the dropped packets were at L2 I believe. Any > > > ideas? > > > > > > Console1> sh ver > > > WS-C6509 Software, Version NmpSW: 7.1(2) > > > Copyright (c) 1995-2002 by Cisco Systems > > > NMP S/W compiled on Feb 7 2002, 16:06:00 > > > > > > System Bootstrap Version: 5.3(1) > > > > > > Hardware Version: 2.0 Model: WS-C6509 Serial #: > > > > > > PS1 Module: WS-CAC-2500W Serial #: > > > PS2 Module: WS-CAC-1300W Serial #: > > > > > > Mod Port Model Serial # Versions > > > --- ---- ------------------- ----------- --------------------- > > > 1 2 WS-X6K-SUP1A-2GE SA Hw : 3.1 > > > Fw : 5.3(1) > > > Fw1: 5.1(1)CSX > > > Sw : 7.1(2) > > > Sw1: 7.1(2) > > > WS-F6K-PFC S Hw : 1.1 > > > 2 2 WS-X6K-SUP1A-2GE SAxxxxxxxxxx Hw : 3.1 > > > Fw : 5.3(1) > > > Fw1: 5.1(1)CSX > > > Sw : 7.1(2) > > > Sw1: 7.1(2) > > > WS-F6K-PFC Sxxxxxxxxxx Hw : 1.1 > > > 3 48 WS-X6348-RJ-45 SAxxxxxxxxx Hw : 1.4 > > > Fw : 5.4(2) > > > Sw : 7.1(2) > > > 4 48 WS-X6348-RJ-45 xxxxxxxxxxxx Hw : 6.0 > > > Fw : 5.4(2) > > > Sw : 7.1(2) > > > WS-F6K-VPWR Hw : 1.0 > > > 5 48 WS-X6348-RJ-45 SAL0xxxx422 Hw : 6.0 > > > Fw : 5.4(2) > > > Sw : 7.1(2) > > > WS-F6K-VPWR Hw : 1.0 > > > 6 16 WS-X6416-GBIC SAxxxxx0JUW Hw : 1.2 > > > Fw : 5.4(2) > > > Sw : 7.1(2) > > > 7 48 WS-X6248-TEL SAD0xxxxx48 Hw : 1.0 > > > Fw : 4.2(0.24)VAI78 > > > Sw : 7.1(2) > > > 8 48 WS-X6248A-TEL SADxxxxxx0S Hw : 2.0 > > > Fw : 5.4(2) > > > Sw : 7.1(2) > > > 9 48 WS-X6248A-TEL SADxxxxxxRZ Hw : 2.0 > > > Fw : 5.4(2) > > > Sw : 7.1(2) > > > 15 1 WS-F6K-MSFC SAD04xx0DSF Hw : 1.4 > > > Fw : 12.1(3a)E4 > > > Sw : 12.1(3a)E4 > > > 16 1 WS-F6K-MSFC SAD04xx0BHV Hw : 1.4 > > > Fw : 12.1(3a)E4 > > > Sw : 12.1(3a)E4 > > > > > > DRAM FLASH NVRAM > > > Module Total Used Free Total Used Free Total U > > > ------ ------- ------- ------- ------- ------- ------- ----- - > > > 1 65408K 44172K 21236K 16384K 9786K 6598K 512K > > > > > > Uptime is 352 days, 4 hours, 30 minutes > > > > > > > > > Console1> sh mod > > > Mod Slot Ports Module-Type Model > > > Sub Status > > > --- ---- ----- ------------------------- ------------------- > > > --- ------ > > > 1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE > > > yes ok > > > 15 1 1 Multilayer Switch Feature WS-F6K-MSFC > > > no ok > > > 2 2 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE > > > yes standb > > > 16 2 1 Multilayer Switch Feature WS-F6K-MSFC > > > no ok > > > 3 3 48 10/100BaseTX Ethernet WS-X6348-RJ-45 > > > no ok > > > 4 4 48 10/100BaseTX Ethernet WS-X6348-RJ-45 > > > yes ok > > > 5 5 48 10/100BaseTX Ethernet WS-X6348-RJ-45 > > > yes ok > > > 6 6 16 1000BaseX Ethernet WS-X6416-GBIC > > > no ok > > > 7 7 48 10/100BaseTX Ethernet WS-X6248-TEL > > > no ok > > > 8 8 48 10/100BaseTX Ethernet WS-X6248A-TEL > > > no ok > > > 9 9 48 10/100BaseTX Ethernet WS-X6248A-TEL > > > no ok > > > > > > > > > 6509>sh ver > > > Cisco Internetwork Operating System Software > > > IOS (tm) MSFC Software (C6MSFC-IS-M), Version 12.1(3a)E4, EARLY > > > DEPLOYMENT > > > RELEASE SOFTWARE (fc1) > > > Copyright (c) 1986-2000 by cisco Systems, Inc. > > > Compiled Sat 14-Oct-00 00:01 by eaarmas > > > Image text-base: 0x60008950, data-base: 0x60DA8000 > > > > > > ROM: System Bootstrap, Version 12.0(3)XE, RELEASE SOFTWARE > > > BOOTFLASH: MSFC Software (C6MSFC-BOOT-M), Version 12.1(1)EX, > > > EARLY > > > DEPLOYMENT RELEASE SOFTWARE (fc1) > > > > > > 6509 uptime is 50 weeks, 2 days, 4 hours, 45 minutes > > > System returned to ROM by power-on > > > Running default software > > > > > > cisco Cat6k-MSFC (R5000) processor with 114688K/16384K bytes of > > > memory. > > > Processor board ID SAD04130DSF > > > R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache > > > Last reset from power-on > > > Bridging software. > > > X.25 software, Version 3.0.0. > > > 6 Virtual Ethernet/IEEE 802.3 interface(s) > > > 123K bytes of non-volatile configuration memory. > > > 4096K bytes of packet SRAM memory. > > > > > > 16384K bytes of Flash internal SIMM (Sector size 256K). > > > Configuration register is 0x102 > > > > > > 6509> > > > > > > > > > > > > ""MADMAN"" wrote in message > > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > > Not real clear on your description. You see dropped packets > > > on > > > > interfaces with nothing plugged in!? Since you refer to the > > > 6500 as a > > > > switch I assume your running hybrid mode. You also mention > > > there is an > > > > MSFC. I ASSume again that your seeing drops on the L2 > > > interface but > > > > with nothing plugged into it is a bit strange indeed! Can > > > you send more > > > > info? > > > > > > > > Dave > > > > > > > > Sam Sneed wrote: > > > > > Hello, > > > > > > > > > > I'm seeing strange things on a 6500 switch. I see dropped > > > pakets and int > > > > > errors on interfaces with no servers plugged in. These are > > > of signifcant > > > > > amounts and I believe tis causing problems.We're talking > > > about 800,000 > > > in > > > > 24 > > > > > hours. Does anyone have any idea on what this happens on > > > INT that aren't > > > > > even active? > > > > > > > > > > This switch has a layer3 sup1a card that does the routing > > > for it. > > > > -- > > > > David Madland > > > > CCIE# 2016 > > > > Sr. Network Engineer > > > > Qwest Communications > > > > 612-664-3367 > > > > > > > > "You don't make the poor richer by making the rich poorer." > > > --Winston > > > > Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63110&t=63053 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
