Hi All Hey I am facing a strange problem in frame-relay My config ---------- my initial config int serial 0 (nothing confgured initially)
Then I cut paste this config and my link does not come up means Interface does not come up. interface Serial0 shut (if i give here no shut then link comes up at one go) encapsulation frame-relay frame-relay lmi-type cisco exit interface Serial0/0.1 point-to-point no shutdown ip address 1.1.1.1 255.255.255.0 frame-relay interface-dlci 108 exit I have to do shut and no shut on main interface why ? if the above commands i execute one by one then the link comes up. Is it a differnece between pasting the config at one go or what when i give command single by single. I enable debugging for frame-relay packets and it shows encap faiiled once only on the above sub interface.is anything frame-relay lmis has anything to do. I am very confused. Thanx in advance Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63446&t=63446 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
