Ismail, It does not look possible. Where are you getting the signalling, timing and IP addresses from? If you can build it on your test bench with just a pair of wires, best of luck.
Steve Wilson Network Engineer -----Original Message----- From: Ismail Al-Shelh [mailto:[EMAIL PROTECTED] Sent: 25 February 2003 13:11 To: [EMAIL PROTECTED] Subject: ADSL Between Head Office and Remote Branch [7:63711] I want to connect my branch office with my head office (1.5Km) away via ADSL without any external service provider. Two copper wires are laid physically from the Head Office to the Branch office. Is this design going to achieve my goal? Clients PC--Ethernet--837 ADSL-----pair of copper wires----837 ADSL---Ethernet--Clients PC Ismail Al-Shelh Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63713&t=63711 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
