As Skarphedinsson told me before about the G.SHDSL 828, he was completely right.
Cisco 828 and SOHO 78 G.SHDSL routers offer an affordable broadband WAN access solution that can be carried over existing copper telephone lines (Dry one). The routers provide a symmetrical WAN connection at speeds up to 2.3 Mbps with a 20,000-foot distance limitation. G.SHDSL standard allow two G.SHDSL routers to directly connect with copper wiring in a back-to-back configuration. This back-to-back scenario allows two Cisco 828 or Cisco SOHO 78 G.SHDSL routers to connect without a DSLAM or IP DSL Switch between the units. Ismail Al-Shelh Thanks for to Troy, Skarphedinsson, Steve Wilson and all. -----Original Message----- From: Ismail Al-Shelh [mailto:[EMAIL PROTECTED] Sent: Wednesday, February 26, 2003 8:52 AM Subject: RE: ADSL Between Head Office and Remote Branch [7:63711] I have read the MXL-2300 Brochure its really not complicated like Cisco DSL products cause to be honest I have lost in Cisco site searching for the right product to implement my solution , I am still interested to look for the equivalent product from Cisco, but if I did not find it then I will go for MXL-2300. Thanks for help. Ismail Al-Shelh -----Original Message----- From: Troy Leliard [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 25, 2003 7:31 PM To: [EMAIL PROTECTED] Subject: RE: ADSL Between Head Office and Remote Branch [7:63711] What you want to do is possible....infact I demo'd something similar. I used the MXL-2300 from tut systems ... http://www.tutsys.com/mtu/products/ethernetworking/mxl_2300/index.cfm at anything under 3.5km you can get about 2MB. I haven't tried it this using any cisco kit, Ismail Al-Shelh wrote: > > I think I have to refine my question to be clearer > > Again > > I want to connect my branch office with my head office (1.5Km) > away via DSL > without any external service provider (phone company). > > > Two dry copper wires are laid physically from the Head Office > to the Branch > office. > > > Is this design going to achieve my goal: > > > Clients PC--Ethernet-dsl router-----dry pair of copper > wires----dsl > router---Ethernet--Clients PC. > > Ismail Al-Shelh > > Thanks for your help. > > > > -----Original Message----- > From: Ismail Al-Shelh [mailto:[EMAIL PROTECTED] > Sent: Tuesday, February 25, 2003 4:11 PM > To: [EMAIL PROTECTED] > Subject: ADSL Between Head Office and Remote Branch [7:63711] > > I want to connect my branch office with my head office (1.5Km) > away via ADSL > without any external service provider. > Two copper wires are laid physically from the Head Office to > the Branch > office. > > > Is this design going to achieve my goal? > > Clients PC--Ethernet--837 ADSL-----pair of copper wires----837 > ADSL---Ethernet--Clients PC > > > > Ismail Al-Shelh Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63842&t=63711 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]