I would say the most simple cisco product for using the dry copper available in your environment would be the long range ethernet(LRE) products. The Catalyst LRE products will do 5Mbps @ 1524meters, but be quite sure of the distance and charactaristics of your copper. I haven't pushed LRE's distance and medium quality demands much so more digging would be in order.
Good Luck, Darrell Newcomb Netswitch Technology Management http://www.netswitch.net ""Ismail Al-Shelh"" wrote in message news:[EMAIL PROTECTED] > I have read the MXL-2300 Brochure its really not complicated like Cisco DSL > products cause to be honest I have lost in Cisco site searching for the > right product to implement my solution , I am still interested to look for > the equivalent product from Cisco, but if I did not find it then I will go > for MXL-2300. > > > Thanks for help. > > > Ismail Al-Shelh > > > -----Original Message----- > From: Troy Leliard [mailto:[EMAIL PROTECTED] > Sent: Tuesday, February 25, 2003 7:31 PM > To: [EMAIL PROTECTED] > Subject: RE: ADSL Between Head Office and Remote Branch [7:63711] > > What you want to do is possible....infact I demo'd something similar. I > used the MXL-2300 from tut systems ... > > http://www.tutsys.com/mtu/products/ethernetworking/mxl_2300/index.cfm > > at anything under 3.5km you can get about 2MB. I haven't tried it this > using any cisco kit, > > Ismail Al-Shelh wrote: > > > > I think I have to refine my question to be clearer > > > > Again > > > > I want to connect my branch office with my head office (1.5Km) > > away via DSL > > without any external service provider (phone company). > > > > > > Two dry copper wires are laid physically from the Head Office > > to the Branch > > office. > > > > > > Is this design going to achieve my goal: > > > > > > Clients PC--Ethernet-dsl router-----dry pair of copper > > wires----dsl > > router---Ethernet--Clients PC. > > > > Ismail Al-Shelh > > > > Thanks for your help. > > > > > > > > -----Original Message----- > > From: Ismail Al-Shelh [mailto:[EMAIL PROTECTED] > > Sent: Tuesday, February 25, 2003 4:11 PM > > To: [EMAIL PROTECTED] > > Subject: ADSL Between Head Office and Remote Branch [7:63711] > > > > I want to connect my branch office with my head office (1.5Km) > > away via ADSL > > without any external service provider. > > Two copper wires are laid physically from the Head Office to > > the Branch > > office. > > > > > > Is this design going to achieve my goal? > > > > Clients PC--Ethernet--837 ADSL-----pair of copper wires----837 > > ADSL---Ethernet--Clients PC > > > > > > > > Ismail Al-Shelh Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63837&t=63711 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
