I ASSume you mean PA's not VIPs ;) What is the part number of the two PA's? Some PA's that play well with VIPs need a differant HW revision in order to work on a 7200. Other than that you should be able to do OIR but it wouldn't be the first time I have seen OIR not work:(
Dave Arnold, Jamie wrote: > I have a couple of VIP cards from an old 7010 that are (according to Cisco) > compatible with a new 7206. One is a single, copper 100Mb card and the > other is a 4 port 10Bt card. I am supposed to be able to add them "hot" to > the new 7206, but when I tried this I got the message on the console that > all interfaces are being disabled....and they were! I didn't wait very long > to see if they would come back upon their own, but this does not seem like > the expected behavior. Can anyone comment on this? I plan to try again and > try to administratively bring the interfaces back up. > > Thanks in advance. > > Jamie -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "You don't make the poor richer by making the rich poorer." --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=63723&t=63673 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
