Actually its not. You need a special adapter to console into these switches. They come with them but I only have 1, I need 4. On Cisco's site they have the following but it looks like a typo
http://www.cisco.com/en/US/products/hw/contnetw/ps792/products_installation_ guide_chapter09186a00800df9d6.html#xtocid3 if you look at the table they RXD and DSR both going to to pin 3. ""Scott Roberts"" wrote in message news:[EMAIL PROTECTED] > the console port is identical to every other cisco router (eia-232, 9600 > baud). > http://www.cisco.com/en/US/products/hw/accessor/ps107/products_tech_note0918 > 6a0080094ce6.shtml > > scott > > ""Sam Sneed"" wrote in message > news:[EMAIL PROTECTED] > > Has anyone done this before? I have a few CSS but don't have the adapters > > for console ports. I'm hoping I can create my own cable using cat5. If > > someone could enlighten me on how to do this that'd be great. Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64399&t=64368 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
