hopefully this time priscilla doesn't chastise me for helping out with CCO material!! ;)
the link you supplied clearly states that its 9600 baud & rs-232 and the table below it doesn't say anything in regards to pinouts for any console port. the "rs-232" specification IS the pinout specification. CSS 11050 Front Panel Connectors and LEDs All front panels of the CSS 11050 models contain connectors and LEDs that vary according to their model number. For example, the CSS 11051 in Figure 2-3 has: a.. 1 RS-232 Console connector (9600 baud) b.. 1 RS-232 Diag connector, reserved for field service use only (115,200 baud) c.. 8 10/100-Mbps auto-sensing Fast Ethernet connectors and their associated Link/Activity status, 10/100 (Mbps), and Duplex (Half or Full) LEDs d.. Power, Status, and Ready LEDs ""Sam Sneed"" wrote in message news:[EMAIL PROTECTED] > Actually its not. You need a special adapter to console into these switches. > They come with them but I only have 1, I need 4. On Cisco's site they have > the following but it looks like a typo > > http://www.cisco.com/en/US/products/hw/contnetw/ps792/products_installation_ > guide_chapter09186a00800df9d6.html#xtocid3 > > if you look at the table they RXD and DSR both going to to pin 3. > > > ""Scott Roberts"" wrote in message > news:[EMAIL PROTECTED] > > the console port is identical to every other cisco router (eia-232, 9600 > > baud). > > > http://www.cisco.com/en/US/products/hw/accessor/ps107/products_tech_note0918 > > 6a0080094ce6.shtml > > > > scott > > > > ""Sam Sneed"" wrote in message > > news:[EMAIL PROTECTED] > > > Has anyone done this before? I have a few CSS but don't have the > adapters > > > for console ports. I'm hoping I can create my own cable using cat5. If > > > someone could enlighten me on how to do this that'd be great. Thanks. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64405&t=64368 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
