Missed the command show ip eigrp timers
rgds > ---------- > From: Shyam, Sharma S (CAP, GECIS) > Reply To: Shyam, Sharma S (CAP, GECIS) > Sent: Thursday, March 06, 2003 6:33 AM > To: [EMAIL PROTECTED] > Subject: RE: Silly EIGRP question [7:64259] > > Michael > > I am not much experiencd but can we use for this. > > Rgds > Sky > > > ---------- > > From: Michael Williams[SMTP:[EMAIL PROTECTED] > > Reply To: Michael Williams > > Sent: Tuesday, March 04, 2003 6:41 AM > > To: [EMAIL PROTECTED] > > Subject: RE: Silly EIGRP question [7:64259] > > > > Priscilla Oppenheimer wrote: > > > A protocol analyzer? ;-) And one that does a decent job with > > > EIGRP. A lot of them don't. I think EtherPeek does in its > > > latest software. Network Associates does a good job with EIGRP. > > > > I'll span a the port connecting out WAN router to the core switch (I'm 99% > > sure we're getting hit with updates from the WAN). We use NA, but haven't > > had the need to use it for EIGRP.. > > > > > You can turn the router into a troubleshooting tool with the > > > various debug commands, of course. There's quite a few for > > > EIGRP and at least one would give you the info that you seek, > > > (probably debug eigrp packet). But, you didn't want to use > > > debugging, for good reason probably. > > > > Yeah.... we don't take debugging on the core routers/switches to easily =) > > Ever since a new guy decided to debug EIGRP in an EIGRP storm without a "no > > logging console". > > > > Thanks! > > Mike Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=64553&t=64259 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]