resending..... -----Original Message----- From: Mustafa Furat Sent: Monday, March 10, 2003 7:21 PM To: [EMAIL PROTECTED] Subject: RE: Silly EIGRP question [7:64259]
hi... INET#sh version Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3640-IS-M), Version 12.0(7)T, RELEASE SOFTWARE (fc2) Copyright (c) 1986-1999 by cisco Systems, Inc. Compiled Wed 08-Dec-99 01:53 by phanguye Image text-base: 0x600088F0, data-base: 0x60E02000 ..... INET(config)#router eigrp 10 INET(config-router)#eigrp ? log-neighbor-changes Enable/Disable IP-EIGRP neighbor logging log-neighbor-warnings Enable/Disable IP-EIGRP neighbor warnings stub Set IP-EIGRP as stubed router I still am not sure if it is for that purpose... but this is how it can be configured... Mustafa -----Original Message----- From: Amar KHELIFI [mailto:[EMAIL PROTECTED] Sent: Monday, March 10, 2003 2:48 AM To: [EMAIL PROTECTED] Subject: Re: Silly EIGRP question [7:64259] hi, eigrp log-neighbor-changes eigrp log-neighbor-warnings Regards, Amar. ""Scott Roberts"" a icrit dans le message de news: [EMAIL PROTECTED] > never heard of that command...doesn't exist to my knowledge (at least on > 12.0) > > scott > > ""Shyam, Sharma S (CAP, GECIS)"" wrote in > message news:[EMAIL PROTECTED] > > Missed the command > > > > show ip eigrp timers > > > > rgds > > > > > ---------- > > > From: Shyam, Sharma S (CAP, GECIS) > > > Reply To: Shyam, Sharma S (CAP, GECIS) > > > Sent: Thursday, March 06, 2003 6:33 AM > > > To: [EMAIL PROTECTED] > > > Subject: RE: Silly EIGRP question [7:64259] > > > > > > Michael > > > > > > I am not much experiencd but can we use for this. > > > > > > Rgds > > > Sky > > > > > > > ---------- > > > > From: Michael Williams[SMTP:[EMAIL PROTECTED] > > > > Reply To: Michael Williams > > > > Sent: Tuesday, March 04, 2003 6:41 AM > > > > To: [EMAIL PROTECTED] > > > > Subject: RE: Silly EIGRP question [7:64259] > > > > > > > > Priscilla Oppenheimer wrote: > > > > > A protocol analyzer? ;-) And one that does a decent job with > > > > > EIGRP. A lot of them don't. I think EtherPeek does in its > > > > > latest software. Network Associates does a good job with EIGRP. > > > > > > > > I'll span a the port connecting out WAN router to the core switch (I'm > > 99% > > > > sure we're getting hit with updates from the WAN). We use NA, but > > haven't > > > > had the need to use it for EIGRP.. > > > > > > > > > You can turn the router into a troubleshooting tool with the > > > > > various debug commands, of course. There's quite a few for > > > > > EIGRP and at least one would give you the info that you seek, > > > > > (probably debug eigrp packet). But, you didn't want to use > > > > > debugging, for good reason probably. > > > > > > > > Yeah.... we don't take debugging on the core routers/switches to > easily > > =) > > > > Ever since a new guy decided to debug EIGRP in an EIGRP storm without > a > > "no > > > > logging console". > > > > > > > > Thanks! > > > > Mike Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=65136&t=64259 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
