Good Morning, I was hoping someone could help me out. I have a single SUP module in my 6509 test chassis. When I power up the chassis with my terminal emulator connected to the console port I can see the image decompressing, and receive the message that the module is being tested, with successful results. I then see my MOTD banner and a request for a password. I also receive message that both the SUP blade and the MSFC blade are on line.
Herein lies the problem; the port will not accept any input from my keyboard. I have moved the console connection to another SUP module in another chassis and it works like it should. I have altered the baud rate on my terminal, with no success. I have switch cables for this console, as well as changing the console port mode (via the button on the front of the module) with no success. Has anyone seen this issue before? Can it be fixed or will I need to setup an RMA with Cisco? Thanks. Steve Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=65293&t=65293 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
