Flow control is something you need to check. You need to have flow control disabled in the terminal software. In certain situations, with hardware or software flow control turned on you will be able to receive but not transmit, or you can lock up the terminal session altogether.
Use 9600, 8 bits, No parity, 1 stop bit. Or is it two stop bits? Some Cisco gear uses one and some use two, so you can look it up or just try both settings. Regardless, you'll want flow control turned off. I see that you tried the same settings with another device and it worked, but it's still something I would check just to be thorough. John >>> MADMAN 3/13/03 10:01:41 AM >>> I have not seen this problem with a 6509 but I have with routers and I RMAed the box. Dave Donohue, Steve wrote: > Good Morning, > > I was hoping someone could help me out. I have a single SUP module in my > 6509 test chassis. When I power up the chassis with my terminal emulator > connected to the console port I can see the image decompressing, and receive > the message that the module is being tested, with successful results. I > then see my MOTD banner and a request for a password. I also receive > message that both the SUP blade and the MSFC blade are on line. > > Herein lies the problem; the port will not accept any input from my > keyboard. I have moved the console connection to another SUP module in > another chassis and it works like it should. I have altered the baud rate > on my terminal, with no success. I have switch cables for this console, as > well as changing the console port mode (via the button on the front of the > module) with no success. > > Has anyone seen this issue before? Can it be fixed or will I need to setup > an RMA with Cisco? > > Thanks. > > Steve -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 I would rather have a German division in front of me than a French one behind me." --- General George S. Patton Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=65326&t=65293 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
