On 2016-06-24, at 08:19, Gentry, Steve wrote: > I'm not getting the results I'd expect when STACK is the first in a pipeline. > What I thought would happen is the entire STACK is read into the stream and > then proceed onto the next stage. This is not happening. Here is my code: > 'PIPE stack' , > '| take 1' , > '| spec 33.8 1' , > '| var EXPDT' > Since TAKE shorts the remainder of its input to its secondary output stream, would it work to connect that secondary stream to HOLE? > I will have at least three lines in the stack. These three lines are created > by another command that uses the " STACK FIFO" (w/o the quotes). > I've hardly mastered connectors. I'd first try STACK LIFO then TAKE LAST 1.
-- gil