I'll check around for it. Hope it's still made. Andy C&C 40 Peregrine On Fri, Feb 1, 2013 at 3:09 PM, dwight veinot <dwightvei...@hfx.eastlink.ca>wrote:
> ** ** ** ** > > Very true, I know Bob to be very meticulous about the seaworthiness, > function and appearance of his boat...he uses it a lot but doesn’t go too > far from home port. I have enjoyed time on board with him and I can attest > to the virtues of “ultimate sole”. It’s hard to accept that a product that > is so good for those who want shine without slip might have been > discontinued. Of course you might be in for doing 5 coats…see what I mean, > he is meticulous!!! He also lifted the sole and sealed the underside and > edges with epoxy. Bullet proof!!!**** > > ** ** > > Dwight Veinot**** > > C&C 35 MKII, Alianna**** > > Head of St. Margaret's Bay, NS**** > ------------------------------ > > *From:* Robert Abbott [mailto:robertabb...@eastlink.ca] > *Sent:* February 1, 2013 3:41 PM > *To:* **cnc-list@cnc-list.com** > *Cc:* dwight veinot > > *Subject:* Re: Stus-List Cabin sole refinish > **** > > ** ** > > Dwight says mine looks pretty but he doesn't take his shoes off when he > goes down below. > > Bob Abbott > AZURA > C&C 32 - 84 > ****Halifax**, **N.S.**** > > On 2013/02/01 3:21 PM, dwight veinot wrote:**** > > ************** > > Make it too pretty and you and everyone else will have to take their shoes > off to enter******** > > ** ****** > > Dwight Veinot******** > > C&C 35 MKII, Alianna******** > > Head of St. Margaret's Bay, NS******** > ------------------------------ > > *From:* CnC-List > [mailto:cnc-list-boun...@cnc-list.com<cnc-list-boun...@cnc-list.com>] > *On Behalf Of *Andrew Burton > *Sent:* February 1, 2013 3:15 PM > *To:* **cnc-list@cnc-list.com** > *Subject:* Re: Stus-List Cabin sole refinish******** > > ** ****** > > Weren't there some here who really liked polyurethane for floorboards? I'd > love to see some pics and get some input. I have mine sealed and am trying > to decide whether to go that route or stick with varnish, which is what I > know, but will take many coats to fill the grain and get the finish I want. > By the way, I am a big fan of gloss finish on the floorboards. Yes they > are more slippery than non-skid or unfinished boards, but I'm not > considering those options... and it's not like our boats have acres of > cabin sole on which to achieve a decent velocity. And gloss sure is pretty! > cheers > Andy > C&C 40 > Peregrine******** > > ** ** > > ** ** > ************** > ------------------------------ > > No virus found in this message. > Checked by AVG - www.avg.com > Version: 2012.0.2238 / Virus Database: 2639/5574 - Release Date: 02/01/13* > *** > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > -- Andrew Burton 61 W Narragansett Ave Newport, RI USA 02840 http://sites.google.com/site/andrewburtonyachtservices/ phone +401 965 5260
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
