Thanks Pierre,
That simplifies it a whole bunch. John From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Pierre Tremblay Sent: Saturday, March 16, 2013 4:53 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Head replacement on C&C 32 Hi John, I did it last September. Replaced the 1988 Wilcox with a Jabsco household bowl. On my 38-3, there is no bolt under the toilet floor. It is solid wood under the fiberglass, and those fasteners are wood screw studs with a round head nuts. I had to switch the pump mechanism to the left because the hole where the hose come from the bilge was to close to the head output and I could not properly shape the hoses. I was able to reuse two of the four screw holes. Hope it helps, Pierre Tremblay Avalanche C&C38-3, Sail 54988 De : John Russo <johnrussob...@optonline.net> À : cnc-list@cnc-list.com Envoyé le : samedi 16 mars 2013 15h52 Objet : Stus-List Head replacement on C&C 32 I am planning on replacing the original toilet on my 1984 C&C32 with a Jabsco compact model # 29030-3000. The original toilet is a Wilcox Crittenden and I have rebuilt the pump once without very good success. Overall Dimensions of the two toilets are nearly identical but mounting holes appear different. I have contacted Jabsco re mounting dimensions of the existing toilet for info without success and looked on line without results. Has anyone done this replacement? If I need new mounting holes how do I get a bolt under the boats toilet fiberglass platform and hold it to tighten a nut on the toilet base for mounting ? Any experience or suggestions? John Arpeggio 1984 C&C 32 Norwalk CT _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com/ CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com