The Dehler DB1 Highlander hauls with that crane for cleaning bottom. It is a 33 foot older design race boat.
I also saw a beneteau 305 get lifted with the crane but the clearance was not sufficient to put on the cradle The C&C 30 would be close but I agree is a bit large for the crane Mike -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Graham Collins Sent: Monday, March 18, 2013 9:03 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Possible C&C 30 purchase Hello Mark You might want to recheck with the club, I believe the rating on the club crane is about 6000 lbs and from what I see the C&C 30 is around 8000 lbs. Also check the height clearance. I previously had an Aloha 27, it was a tight fit. I'm not aware of any 30 footers that get hauled with that crane. That said, the annual big crane launch and haul isn't much of a problem. And I have not examined the numbers, it may be possible. I've sailed on Jeff's C&C 30, it is a fine boat and sailed well in what I'd guess was > 25 knots. He keeps it at AYC. There are lots of others in the neighborhood. Hope the search goes well. Graham Collins Secret Plans C&C 35-III #11 BBYC, Halifax On 2013-03-18 4:33 PM, Dr. Mark Bodnar wrote: > > Hi All, > > I'm new to the list. Just joined up as I'm getting serious about > moving up to a bigger boat. > Currently sail a Mirage 24 in Halifax NS Canada, bought it last year, > loved getting back on the water, but it's a little small to spend much > time aboard with my 4 kids. > > After extensive online research and scanning Yachtworld and local > boats I've narrowed down on trying to get a C&C 30. Seems to be the > right size - small enough to singlehand, and light enough for our club > crane to hoist, but still big enough to spend some time out on the water. > > I've read most everything on the C&C site, including a bunch of the > mailing list archives. Was on a local boat here the other day - > getting an idea of the size and space. > > I know the mast step is prone to softening, and the ports will likely > need replacement (if not done already), plus there are the typical > issues with the deck core, chainplates, standing rigging etc that can > be problematic with any older boats. > > Any specific advice on things I need to watch for? I have someone > I've chatted with on SailNet who has offered to check out one boat for > me (in Long Island NY there is a nice looking 30 for sale - new diesel > in 2000, well fitted out) > > Thanks in advance for the advice, > > Mark > > > There is no cure for birth and death save to enjoy the interval. > - George Santayana > > > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > CnC-List@cnc-list.com > > _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com