Your current winches are probably Barient 18s, at least that is what was 
original on my boat.
 I looked long and hard at the Anderson 28st winches and I agree that they are 
a good fit for the C&C27.
 A Barient 19st is pretty much an 18 that is self tailing, but almost 
impossible to find now.
 In the end I bought a couple of used Barient 21-30st winches but only because 
they were way cheaper than a new pair of Andersons.
 I have not found the larger diameter to be of any particular advantage, and 
there seems to be a greater tendency for over-rides,
but self tailing was the feature I was after and I like them for that.

 Steve Thomas
 1978 C&C27 MKIII

-----Original Message-----
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com]On Behalf Of Paul
Baker
Sent: Monday, August 05, 2013 5:03 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Primary winches for MkII 27'


Hi Listers,
I'm seriously considering replacing the current (I assume factory
standard) Barient single-speed winches.  I'm not at the boat at the
moment, I think they are 16s.  Anyway, I am looking at the Anderson 28ST
(two speed, self tailers).  Is the 28 too big, too small, what do you
have on your 27?
Cheers,
Paul.

Orange Crush
1974 27MkII

_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com


_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to