We recently had a similar problem that turned out to be corroded battery
cables; corrosion inside the insulation. We cut back a few inches of cable
'til no more corrosion and the problem was solved.
Ron
Wild Cheri
C&C 30
STL
________________________________
From: Ed Levert <elev...@grayinsco.com>
To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com>
Sent: Friday, September 20, 2013 10:53 AM
Subject: Re: Stus-List Yanmar 3GMF Starting Problem
First thing I would try would be a thorough cleaning of the battery terminals
and battery posts. Then clean the terminals on the push button switch. Finally,
change the switch.
Ed
Briar Patch - C&C 43
New Orleans La
From:CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Indigo
Sent: Friday, September 20, 2013 10:52 AM
To: cnc-list@cnc-list.com
Subject: Stus-List Yanmar 3GMF Starting Problem
Recently Indigo has developed what is currently annoying problem, but could
become more serious. After turning the key (and getting the low oil-pressure
buzzer), when I press the starter button, absolutely nothing happens. I press
it again, and it usually starts right up. Occasionally more pushes on the
button are required. Is the remedy going to be simply replacing the
push-button ignition switch or am I likely facing something more to fix?
Indigo – 36MKIII
Southport CT
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
