The camera (gopro) is mounted on the side of the split backstay that has
the radar tower. My boat has hydraulic backstay adjusters so I don't have
to worry about the lines for the adjuster.

I tried the pulpit but that was a little too low. I tried my head, but in
addition to being almost un-watchable (although interesting to see where
you are looking during a race while driving) gave me a headache from the
harness.

Before I found a mount that would fit the radar tower (2" diam). I was
considering putting it on a camera monopod that would be attached to the
pulpit so it was high enough so I didn't block the view when I was standing
in front of it.



On Wed, Oct 9, 2013 at 9:56 PM, Jim Reinardy <firewa...@reinardy.us> wrote:

> Eric,
>
> Great video!  Where is your camera mounted, on the backstay somewhere?  I
> have been trying to come up with the right place for ours.
>
> Thanks!
>
> Jim Reinardy
> C&C 30-2 "Firewater"
> Milwaukee, WI
>
> Sent from my iPad
>
> On Oct 8, 2013, at 4:37 PM, "Eric Baumes" <eric.bau...@gmail.com> wrote:
>
> Chuck,
>
> Here is some video from a regatta a couple weeks ago. It was blowing 15-20
> with gusts to 25. We were light on crew so we raced non-spinnaker.
>
> If you watch during the upwind leg, you will see when a puff hits and the
> main trimmer doesn't ease fast enough, the boat will heel, then try to go
> head to wind as main is over powering the boat and the rudder can't hold
> the bow down.
>
> You will also see an horrible example of barging at the start of the race.
> I should have protested, but I needed to go home right after the last
> race...
>
>
> http://www.youtube.com/watch?v=TI9Isckn090&feature=share&list=UU4frUYOc9Q9-mWgjneirYCw
>
>
>
>
>
> On Tue, Oct 8, 2013 at 5:16 PM, Chuck S <cscheaf...@comcast.net> wrote:
>
>> Always thought a smaller headsail will point higher than a big one?
>>
>> Chuck
>> Resolute
>> 1990 C&C 34R
>> Atlantic City, NJ
>> ------------------------------
>> *From: *"David Risch" <davidrisc...@msn.com>
>> *To: *"CNC CNC" <cnc-list@cnc-list.com>
>> *Sent: *Tuesday, October 8, 2013 10:54:15 AM
>>
>> *Subject: *Re: Stus-List C&C 34
>>
>> Rob Ball told me to not let the 40 get beyond 22 degrees of heel.
>>
>> That plus I will not let the rudder go beyond 5 degrees of angle.
>>
>> Off the wind less heel is easier on all aboard and faster.   Racing
>> uphill I push the upper limit of that number by keeping the biggest
>> headsail for pointing.
>>
>> All sail configs follow suit.
>>
>> I doubt that figure is universal but it may help.
>>
>> David F. Risch
>> 1981 40-2
>> (401) 419-4650 (cell)
>>
>>
>> > Date: Tue, 8 Oct 2013 11:28:45 -0300
>> > From: robertabb...@eastlink.ca
>> > To: cnc-list@cnc-list.com
>> > CC: oldste...@sympatico.ca
>> > Subject: Stus-List C&C 34
>> >
>> > Steve:
>> >
>> > I am going to throw one at the list that should raise some controversy.
>> > There was a C&C 34 at our club....the owner was a coastal cruiser, felt
>> > the boat was a little tender for that purpose so he had a 'shoe added
>> to
>> > the keel' .
>> >
>> > We were both in Halifax harbor....about 18 to 20 knts true and 3'
>> > seas.....I only had my 110% Sobstad up and he had a larger headsail (I
>> > count not be sure if it was a 135% or 150%) and his main sail.
>> >
>> > The wind was building.....he was coming in, I was going out. When we
>> > passed each other, he turned around to come back with me upwind.
>> > .....his boat was overpowered......flogging his main.....rounding up in
>> > the gusts.
>> >
>> > I constantly pulled away from him.....he hung in for about 20 minutes
>> > and then gave up.
>> >
>> > I can't speak for the 34 but my boat can not carry a 150% (plus a main)
>> > in 20 knts true.
>> >
>> > Let the fun begin.
>> >
>> > Bob Abbott\
>> > AZURA
>> > C&C 32 - 84
>> > Halifax, N.S.
>> >
>> >
>> >
>> >
>> > On 2013/10/07 10:23 PM, OldSteveH wrote:
>> > > That's a great list Dennis. I do most of those things but forgot about
>> > > moving the genoa sheet aft, that's a good one.
>> > > The other thing I do which is not on your list is to feather off the
>> main
>> > > and carry some luff when we're overpowered, re-trimming as opportunity
>> > > allows. From now on I will ease the genoa car back first.
>> > >
>> > > Per other comment about heel the 34 seems to be comfortable carrying
>> 20
>> > > degrees of heel and still point and keep up her speed. Guestimating
>> the
>> > > performance at 25 to be similar to 15, I have generally decided to
>> reef when
>> > > I am constantly over 25 and there are no more sail trim adjustments
>> > > available.
>> > >
>> > > Last Sat we were able to keep the #1 up in 20 knots true (25-26
>> apparent).
>> > > I'm certain we could not have placed as well without it. BTW only 4
>> aboard,
>> > > not much railmeat to help out!
>> > >
>> > > Dennis, I have an inboard track and also a coach roof track for the
>> #3.
>> > > I'm not seeing what advantage leading the #1 from the toerail will
>> give
>> > > except to limit how close the sail can be sheeted, but also taking
>> away my
>> > > ability to adjust the car position.
>> > >
>> > > Steve Hood
>> > > S/V Diamond Girl
>> > > C&C 34
>> > > Lions Head ON
>> > >
>> >
>> >
>> >
>> > _______________________________________________
>> > This List is provided by the C&C Photo Album
>> > http://www.cncphotoalbum.com
>> > CnC-List@cnc-list.com
>>
>> _______________________________________________
>> This List is provided by the C&C Photo Album
>> http://www.cncphotoalbum.com
>> CnC-List@cnc-list.com
>>
>> _______________________________________________
>> This List is provided by the C&C Photo Album
>> http://www.cncphotoalbum.com
>> CnC-List@cnc-list.com
>>
>>
> _______________________________________________
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
>
>
> _______________________________________________
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
>
>
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Reply via email to