I bought my KiwiProp from the newish company back in 2006. At the
time they didn't make one that would match the lower HP rating of a
motor that you typically find installed in a 26 footer.
Cheers, Russ
Sweet 35 mk-1
There is a new Kiwi company out of New Zeland making composite
feathering props getting rave reviews. A friend put one on his
Sweden 38 and says he gained a half knot under sail and
power. Here is the contact info. Web site -
<http://www.kiwiprops.co.nz/cms/index.php>http://www.kiwiprops.co.nz/cms/index.php,
POSTAL
ADDRESS:
FACTORY LOCATION:
Kiwi Feather Props Ltd 12
c Homestead Drive, Mt Wellington, AK 1072
PO Box 25-367
St Heliers Bay
Auckland 1740, NEW ZEALAND
email: <mailto:kiwipr...@xtra.co.nz?Subject=Web%20Query>Email
Kiwiprops GMT + 12 hours
Phone: +64 9 5757 975
Factory: +64 9 5745 606
-----Original Message-----
From: Steve Thomas <sthom...@sympatico.ca>
To: cnc-list <cnc-list@cnc-list.com>
Sent: Mon, Oct 21, 2013 8:18 am
Subject: Re: Stus-List Folding/feathering Props
Sam,
I found a used geared Gori for my 27 and it works fine in
forward and reverse. I had hoped to find a 3 blade folder of some
kind to minimise vibration but when I checked the manufacturers
specifications there were none available in a small enough
diameter. That was a few years ago so it might not be true now.
Steve Thomas
C&C27 MKIII
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
