Sam,
Another vote for Flex-o-fold. Put a 2 blade on Perception after we repowered and love it, replaced a 3 blade Campbell Sailor β and great in forward and reverse. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of sam.c.sal...@gmail.com Sent: October-21-13 4:02 AM To: cnc-list@cnc-list.com Subject: Re: Stus-List Folding/feathering Props Good experiences; thanks for sharing. Looks like two or three endorsements for the Max Prop; about the same against the Martec; one for the Flexofold; ...and a Gori replacing a Martec! couple of questions: How big a deal is the maintenance on the Max Prop? Is it just a matter of greasing the prop every couple of years or is there more? - I pull the boat out of the lake every October; so it wouldn't be too much of a concern. I still have the old prop on the shaft. Am I correct in assuming that the taper is a standard SAE? I'm going to need to know for sure before I order. (Probably safer to remove the prop and measure for peace of mind!) Any more information / experiences / insights welcome. sam C&C 26. Liquorice Ghost Lake Alberta ββOn 10/20/2013 7:21 PM, Tim Goodyear wrote: Sam, I have a two blade Flex I Fold, which goes nicely forwards and backwards and replaced a 2 blade non-geared Martec that went sideways in reverse and sometimes went forward if the blades opened together (even after rebuilding). The two do not compare. Tim Mojito C&C 35-3 Branford, CT On Oct 20, 2013, at 7:10 PM, David Donnelly <da...@gnuattitude.ca> wrote: Sam I also have the 2 blade Martec and a 26. I have not found poor performance in reverse but I don't do it a bunch either. Can push just fine going forward. David Sent from Samsung Mobile -------- Original message -------- From: Harry Hallgring <hhallgr...@icloud.com> Date: 10-20-2013 5:00 PM (GMT-07:00) To: cnc-list@cnc-list.com Subject: Re: Stus-List Folding/feathering Props Sam, I have a two blade folding Martec prop that goes 7 kts forward and four kts directly sideways in reverse. Going with a Gori this winter. Harry Sent from my iPhone 6Beta On Oct 19, 2013, at 20:21, Sam Salter <sam.c.sal...@gmail.com> wrote: This winters project is a folding/feathering prop. I've just sent off inquiries to: Flexofold Max Prop Slipstream Anyone got any comments/observations/likes/dislikes. Any experience good or bad with any type of folding/feathering prop would be useful. Any other manufacturers recommended. Now is your chance to get in on a real sailing topic - folding/feathering props OR rum! sam :-) C&C 26 Liquorice Ghost Lake Alberta _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
