I totally agree with you on that, Gary. Did that once on a C&C 27 and never will I ever do it again.I don't think there is any way to avoid inhaling or ingesting some of the toxic dust short of air supplied hoods and even with that after 1 day of such work overhead I could not lift my arms to comb my hair.I will happily pay someone else to do the job if I ever need it done again, no matter what patented special scrapers may be available to use.if I can afford to own the boat and I want the bottom smoother than it is now then I can afford to pay to get it done by someone else. I can't imagine tackling this job on a C&C 38 but I encourage Rich to continue the development of that powered scraper tool but to still hire getting the job done with blasting media if he is permitted to do that in the yard where his boat is situated.
_____ From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary Nylander Sent: April 15, 2014 3:46 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List Bottom paint removal Somehow, I just don't get it. A friend is having his Morris 36 stripped at the yard where my boat sits (in the water). They went through some peel away stuff, then some random orbital (air powered) and then again with some finer sandpaper. It has been a couple of weeks...... Last year they had the soda blasting folks come in and after about four hours, the bottom of a larger boat was as smooth as it came out of the mold. I just don't get it. I'll ask my friend what he was thinking tomorrow at lunch.... After going through that mess and brute labor a few years ago, I would never do it again, no matter how 'easy' the tool is - I just don't want to stoop under a boat holding any tool over my head, taking off toxic crap. Gary ----- Original Message ----- From: Dr. Mark <mailto:drbod...@accesswave.ca> Bodnar To: cnc-list@cnc-list.com Sent: Tuesday, April 15, 2014 2:02 PM Subject: Re: Stus-List Bottom paint removal I know sucking in the dust from scraping the bottom is not good - but in the past I've used a random orbital sander with a fairly rough grit paper (and a mask) Seems to go pretty quickly, or at least it did on my little 24' Are scrapers preferred? I'd have thought the finish would be much rougher. Mark There is no cure for birth and death save to enjoy the interval. - George Santayana On 15/04/2014 2:54 PM, PME wrote: Hi, Scraping off bottom paint is a pain with a cheap steel scraper. Once has to nearly sharpen the blade ever other second. This year I discover using a good tool really matters. Don't use a steel scraper, pay the $23 and get a tungsten carbide scraper. One blade will last a whole side of the boat or more. I was amazed. Here is a link to a scraper I used on a 38LF. Bahco 665 Carbide Edged Heavy-Duty Paint Scraper http://www.amazon.com/Bahco-Carbide-Edged-Heavy-Duty-Scraper/dp/B0001IX7S8/r ef=sr_1_1?ie=UTF8 <http://www.amazon.com/Bahco-Carbide-Edged-Heavy-Duty-Scraper/dp/B0001IX7S8/ ref=sr_1_1?ie=UTF8&qid=1397584146&sr=8-1&keywords=scraper+bah> &qid=1397584146&sr=8-1&keywords=scraper+bah - Paul E. 1981 C&C 38 Landfall S/V Johanna Rose Carrabelle, FL On Apr 15, 2014, at 10:55 AM, cnc-list-requ...@cnc-list.com wrote: Message: 4 Date: Tue, 15 Apr 2014 00:29:43 -0300 From: Rich Knowles < <mailto:r...@sailpower.ca> r...@sailpower.ca> To: cnc-list Cnc-List < <mailto:cnc-list@cnc-list.com> cnc-list@cnc-list.com> Subject: Stus-List Bottom paint removal Message-ID: < <mailto:2ef7ca9a-bfa1-4c91-9820-3dfea7c86...@sailpower.ca> 2ef7ca9a-bfa1-4c91-9820-3dfea7c86...@sailpower.ca> Content-Type: text/plain; charset=windows-1252 I got adventurous this year and decided to remove as much of the existing bottom paint as possible. There are many layers on the boat that have accumulated over time. Ordinary manual scrapers take a lot of time and energy, and sharpening. I developed this scraper which will fit in any reciprocating saw and uses a carbide blade. It is a lot easier and quicker and the blades last much longer than regular steel blades. Here?s a video: <https://www.youtube.com/watch?v=_2lsNuCrfgk> https://www.youtube.com/watch?v=_2lsNuCrfgk Now, all I have to do is get at it as soon as the rain stops for a few days and the temperature becomes bearable. Rich Knowles INDIGO LF38 Halifax, NS. _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com _____ _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
