Joe Well done! Following seas are tough especially in the chessie chop. Raced on s 40.7 shoal draft in West river. Boat rounds up like crazy in a gust. More tender than my 35/3. Guessing the rudder is shorter to match the keel.
Joel On Monday, October 20, 2014, Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > I finally did it – downhill both ways J > > We had strong SW winds on Friday and I was going NW and we had strong NW > winds on Sunday and I was going SW. Usually I get the reverse. I also had > the unique issue of overtaking a car carrier. He was doing 13 knots coming > up the channel, slowed down to about 8 passing me, and then hit reverse and > stopped right in front of me. I had to call him to see which side was best > to pass him on. This was also my longest time hand steering all year. Otto > is very old and not so good at following seas. > > > > *Joe Della Barba* > > *Coquina* > > *C&C 35 MK I* > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com > <javascript:_e(%7B%7D,'cvml','cnc-list-boun...@cnc-list.com');>] *On > Behalf Of *Chuck S via CnC-List > *Sent:* Sunday, October 19, 2014 8:21 PM > *To:* CNC boat owners, cnc-list > *Subject:* Re: Stus-List sailing this weekend > > > > Went to my boat Saturday late. Stayed overnight and enjoyed the quiet and > solitude, having the whole marina to myself. It dropped into the 40's and > everyone else went home. Today I stayed in the slip because of the cool > weather and gusty 20+ winds. No boats went sailing. Instead I finished a > few projects and started few more, and made some new friends helping them > with their boats. I always learn new techniques, watching how others do > things. > > > > Found a lot of play in my steering last time out, so I tightened the cable > and lubed it. Found a teaspoon of rust under the pedestal, so I think it's > due for a new idler sheave mounting plate? That's probably why the cable > got loose? I could only find complete assemblies for $450 online. All I > need is the plate. The sheaves and uprights are fine. Has anybody else > replaced theirs? I'd like to get a bronze one. > > > > > Chuck > *Resolute* > 1990 C&C 34R > Broad Creek, Magothy River, Md > > > ------------------------------ > > *From: *"CNC boat owners, cnc-list" <cnc-list@cnc-list.com > <javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');>> > *To: *"Baumes, Eric" <eric.bau...@gmail.com > <javascript:_e(%7B%7D,'cvml','eric.bau...@gmail.com');>> > *Cc: *"CNC boat owners, cnc-list" <cnc-list@cnc-list.com > <javascript:_e(%7B%7D,'cvml','cnc-list@cnc-list.com');>> > *Sent: *Sunday, October 19, 2014 7:30:16 PM > *Subject: *Re: Stus-List sailing this weekend > > > > No blooper this time round - the wind was a bit far forward. Great day > out on the water though; 9.8 knots downwind (until I chickened out as the > wind went forward and broaches started to get more frequent and more > violent), 6.3 up in 28-35 apparent (one major round up on a big shift we > didn't spot coming). We had relatively flat water, sunshine and lots of > wind - great end to the season! > > > > Tim > > Mojito > > C&C 35-3 > > Branford, CT > On Oct 17, 2014, at 10:59 AM, Eric Baumes <eric.bau...@gmail.com > <javascript:_e(%7B%7D,'cvml','eric.bau...@gmail.com');>> wrote: > > > > > -- Joel 301 541 8551
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
